TEL +49 (0) 7034 31000    |    (UTC+1)   |    Contacts

We have a solution for
lifetime problems on impellers
by means of protective coatings!

Image not available
Image not available
Slider

Scope of application:

Open impellers
Closed impellers
Single-blade / multiple-blade impellers
Non-clogging impellers
Screw impellers
Rubber / Polyurethane impellers

Downloads:

KSB Pumps Test Winner

The elastomeric MetaLine coating technology is the big winner of the "KSB Pumps (Germany) coating test". In comparison with about 25 international competitors, our energy absorbing material process has established itself with an up to 35 (!) times higher wear resistance!

As the only (!) synthetic coating at all, MetaLine has been classified by KSB as "... a functional cavitation protection ..."! The erosion resistance was even rated twice as high as KSB’s special alloy "Noridur"!

More information

 

 

METALINE SERIES 700

MetaLine Series 700 coatings absorb destructive impact energy through permanently elastic material properties. Coating thickness is adapted individually to the stress parameters and flow conditions of the pump design. This usually results in 4–5 times higher lifetimes for impellers coated with MetaLine compared to unprotected cast iron designs. Depending on the actual impeller size, coatings up to rotational speeds of approximately 1.500 rev/min. are recommended.

The solid content of the pumped medium can be well over 50 %. Constant liquid temperature should not exceed 60°C on average. Ideal for saltwater (offshore) applications.

 

Product details

Please publish modules in offcanvas position.